Centrifugal Surface Solar Pump. SCP Sensorless, Brushless DC - CMP Series

The SCP solar powered centrifugal pool pumps with sensorless, brushless DC motors are the ultimate in performance and reliability. The CMP series features a 2” outlet.

SCP series pool pumps will replace almost any AC powered pool pump up to 2 HP and because they get their power from the sun, you will never have an electric bill.

The Sensorless Brushless DC Motors are the ultimate in efficiency, performance and reliability. Designed specifically for solar applications, these motors are less than half the size and weight of a conventional brush type motor and will provide years of trouble free service.
 
The SCP series pump are single stage centrifugals constructed from high performance  thermoplastic. They are extremely resistant to mineral and algae deposits while providing outstanding strength and durability. For added protection there is a basket strainer incorporated into the suction side of the pump. Simplicity is a key feature of the SCP series pumps. They are simple to install and field servicing is easily accomplished without the use of specialized tools.

SunPumps SCP series pumps can not only be used for pool water filtration, but for fountains, water features, pond aeration, circulating water for aqua culture or to irrigate small farms. They were designed for use as a stand-alone water delivery system. There is no better way to provide water for remote homes, villages, small farms as well as many other needs beyond commercial grid power. SunPumps high-quality manufacturing make the SCP series pumps the ultimate in solar powered pool pumps.

Model SCP 86-65-180 BC

Discharge Port Size: 2"
86 - Gallons per minute at peak efficiency
65 - Feet of total dynamic head (lift) at peak efficiency
180 - Volts nominal operating voltage.

Maximum Flow: 175.00 gallons per minute at 0 feet
Maximum Lift: 0.00 gallons per minute at 92 feet
(when powered at the maximum of 180.00 volts)



 Solar Pump Curve Data
 Solar Pump Manual

_______________________________________________________

Optional Sun Pumps PCC Series Brushless Controller

The only application the controllers are designed for is the interface between a solar module array and SunPumps.

The PCC-BLS series controllers are microprocessor based solid state DC power converters designed as the interface between a solar module array and a three phase brushless sensorless DC pump motor.

The purpose of the controller is to operate the high efficiency, high reliability DC motor and maximize the total daily water output while providing protection for the pump as well as providing an interface with other related pumping system equipment.

The SunPumps PCC-BLS-M2 series controllers were designed specifically for SunPumps three phase Sensorless Brushless DC motors. When properly installed and configured, the features incorporated into this stand-alone system will control and protect your pump system permitting many years of dependable, trouble free service.

The PC series controllers will boost the current of solar modules in low sunlight conditions while holding the voltage of the solar modules at the maximum power point. This allows a pump to start much earlier in the morning and stay running longer in the evening.SunPumps PC series pump controllers have many unique features designed specifically for water pumping.

Sun Pumps Controller Includes

• Pump speed control circuit
• Remote switch circuit
• Sensor-less low water cut-off circuit
• Electronic circuit breaker and indicator lights
• LCD screen displays motor voltage, current, motor speed & power

Sun Pumps Controller Features

• Current boosting for matching the load requirements of the pump.
• Voltage regulation of the solar electric array at its maximum power
   point. (MPPT)
• Over-current protection via integrated electronic circuit breaker.
• Reverse polarity protection (10 amperes maximum) on the input
   terminals.
• Voltage and current limiting to pump motor.
• Transient protection and surge suppression.
• Adjustable output motor power control for precision output flow.
• Digital display indicating status, power, voltage, current and more.
• System ON/OFF switch.
• LED indicators; 1. Power In, 2. Motor Run, 3. MPPT, 4. RS Stop,
   5. Low Power, 6. Over-Current, 7. Fault Condition.
• Weather resistant powder coated, die cast aluminum enclosure
   with a hinged door.
• Rising clamp screw terminal blocks – no fork terminals required.
• Pre-adjusted pump configuration and power source selection.
• Remote switch interface – float switch or remote shutdown –
   Normally Open or Normally Closed, user selectable.
• Sensorless “Low Water” circuit
• Low Power Shut Down circuit

Controller PCC-180BLS-M2 Specifications

Min. Voltage*: 120V
Max Voltage: 300V
Minimum Power: Set by LWC
Maximum Power: 2250 W
Low Water Cut-Off Min: 100 W
Low Water Cut-Off Max: 1023 W
Nominal Voltage: 180V

*Min Voltage is the minimum voltage which the controller must have in order to start the motor. Voltages lower than this will not damage the controller but it will not attempt to start the motor.

Controller Data Sheet

To use a controller as interface between PV panels and pump, you must use SunPump brand, no substitutions.

Made in the USA


Product Manufacturer: Sun Pumps, Inc.

_______________________________________________________

Is this the right size pump for my pool?

Quick Sizing - The quick sizing method is based on the volume of the pool in gallons and between 1 and 1.5 turn-overs per day.

For example if you have a 20,000 gallon pool you want to size the pump for between 20,000 to 30,000 gallons per day.

If you have 6 average sun hours then divide by 6 hours (360 minutes) to get gallon per minute

(20,000 / 360 = 55 GPM or 30,000 / 360 = 83 GPM)

_______________________________________________________

Complete Packages with Solar Pool Pump, Controller, and Solar Panels are also available. Please contact us with your pool size, pressure requirements and location of pool so that we can configure a kit especially for you.

Made in the USA

Product Manufacturer: Sun Pumps, Inc.

_______________________________________________________

HELP » Contact Customer Support
• Toll-Free help line offering sizing support
• Online e-mail technical and installation support

_______________________________________________________

Processing and Delivery Information: Please allow Processing Time as stated above for your order, plus standard transportation delivery time. Orders placed after 2PM EST may not begin processing until the next business day. Please call for Rush Processing and/or Rush Shipping options.