Titan SCR2
Tankless Water Heater

By heating water only as it is needed the Titan SCR2 Tankless Water Heater eliminates the need for bulky water heaters that heat water continuously. This can reduce hot water costs up to 60% over conventional electric water heaters. The Titan SCR2's high efficiency is in part due to its dedicated analog microprocessor that samples input and output temperatures 21 times per second.

This power control system analyzes the data and manages power usage for maximum efficiency and temperature stability. At rest, the Titan SCR2 uses no power at all.

Available in seven models, the Titan SCR2 is ideal for a wide range of application. One Titan SCR2 unit can supply the hot water needs of home and apartments, and in some applications, energy saving can pay back unit cost in less than one year.

Due to its shielded incoloy heating elements and copper & brass casing, the Titan SCR2 is ideal in any application where mineral deposits shorten the life of a conventional water heater.

Titan SCR2 Specifications
Compliance	UL # 499
Standards	ANSI-Z
Tested	Applied Research Lab # 29-580
Dade Approval	# 97-0627.16
Dimensions	7"W x 10” H x 2-3/4 D
Weight	8lbs
Materials	Brass Casting
Pipe Fitting	1/2" Standard Pipe
Pressure Requirements	5 PSI-Min./150PSI-Max
Voltage	220 VAC Std.(208/277 Avail.)
Elements	Dual Incolony/Nichrome
Energy Efficiency	Up to 99.5%
Activation	0.4 GPM-on/0.3 GPM-off
Indicators	red-on/Amber-Stand by
protection	Dual Microtemp Thermofuse - Manual Resetable Thermostat

Product Features:
• Enjoy endless showers
• Never run out of hot water
• Save up to 60% on water heating costs
• Compact design allows installation almost anywhere
• Quick and easy installation requiring no venting
• Space age NASA technology
• Environmentally friendly
• Quality made in the USA
• Industrial grade performance
• Serving the market since 1986

Electrical Requirements
Model	Max Kw @ 220V	Volts	Max Amps @ 220V
N-120	11.8KW	220V	54
N-100	10.8KW	220V	49
N-85	8.5KW	220V	38
N-75	7.5KW	220V	34
N-64	6.4kW	220V	29
N-42	4.2KW	220V	19
N-10	3.2KW	110V	29*
*N-10 uses 110 volts and will supply only warm water.

Product Applications:
• Anywhere hot water is needed: Residential and Recreational: Houses, Apartments, Condominiums, Boats, Camps, Offices, Cottages, Barber Shops and Beauty Salons.

Product Warranty:
• 10 years on casing, 1 year on components
Titan Tankless Water Heater Warranty [Pdf format]

Product Installation:
• Vertical Installation only.
Click on the following for important installation information:
Titan Tankless Water Heater Installation [Pdf format]

Product Manufacturer: Niagra Industries, Inc.

Hot Water Energy Conservation:
One way to save on domestic hot water bills is to use Demand Type Water Heater. A conventional hot water system heats water in a tank to a specified temperature. As heat is lost from the tank, the water is reheated until it reaches the specified temperature again. For most of the day the water in the tank is not used, but it loses heat continually. Demand Water Heaters eliminate this problem by heating water only as hot water is drawn.

Avg./gal. hot water per/usage
Shower	20
Bath	20
Hands and face washing	4
Shaving	2
Hair Shampoo	4
Hand dishwashing	4
Automatic dishwashing	14
Food Preparation	5
Automatic Clothes Washer	32

Click here for Water and Energy Conservation Tips 

Twin Titan: The Power Of Two
By combining two units in a parallel circuit you are able to effectively double the heating power of your tankless water heating system. This method is ideal in colder climates, where the incoming water temperature is below 50°F. Please consult with our installers for requirements.

1. Water enters the system
2. Valves in place for serviceability, convenience.
3. Water entering the Titans is heated instantly.
4. Heated water en route to load: showers, etc.
5.6 AWG wire for Titan Heaters
6. 60 AMP Double Pole Breakers

Which is better, a Twin Titan setup or a single box housing two units inside?

• The Twin Titan setup provides Redundancy, a backup plan, if you will.
• In a Twin Titan setup, if one unit needed to be serviced, you would be
• able to remove that unit and send it in for service. All the while, the
• other Titan will still be heating your water. In a single box housing two
• units, you will need to completely remove the entire box and send it in
• for repair, leaving you cold.
• The Twin Titan configuration has approximately 25% higher heating
• capacity than the largest "single" box from the competition.
• Our Twin Titan configuration costs about 1/3 (one-third) less than the
• competition's"single" box.
• The Titan has a proven and established track record. Since 1986 our
• units have been heating the water in homes across the US and
• abroad.

________________________________________________


HELP » Contact Customer Support 
• Toll-Free help line offering sizing support
• Online e-mail technical and installation support

____________________________________________________

Return Policy
All Tankless Water Heaters are tested at the factory just prior to shipment. It is the customer's responsibility to determine if sufficient electrical capacity exists to install the water heater prior to placing the order [See Tankless Water Heater Installation Guide]. Unit sizing must be determined by the customer using the temperature rise chart based on the required flow rate.

A 20% restocking fee will be applied to returns of new units in original packaging (see policy page for instructions). The shipping cost will not be refunded. Once the Tankless Heater has been installed it cannot be returned.