Product not available. For a
comparable product, please click here
The
new SolPal L Plus is suitable for ANY quality
water.
The original SolPal
L is suitable for high quality/treated water.
SolPal L Plus - with Drinking-Water Plastic
Coating
Solpal®
developed the Plus version for areas
with high chloride values and aggressive water.
• Approved for
drinking water
•
Resistant against sea water
• Up to 12% more efficiency than the original SolPal L
• Improved heat
loss proberties
•
Extended application range: suitable for poor quality
water
The plastic coating withstands aggressive water with
more
than 10,000 ppm chloride at high temperature (original
SolPal limit 250 ppm)
SolPal® Collector for Solar Water Heating.
Due to its perfect combination of a solar collector with a hot water storage
tank, SolPal® is more efficient than traditional thermosiphon systems. SolPal®
is a compact system with an integrated hot water tank that is suitable for the
most diverse applications. Whether you own a family home, a villa, a holiday
resort or a weekend retreat, SolPal® is the ideal solution.
SolPal Benefits:
• Save up to 80% of water heating costs
• Save up to 30% of total energy costs
• Best price/performance ratio
• Federal tax
incentives
• Hot water
365 days a year
•
Investment against future energy costs
• Compact solution for hot
water production
The simple, compact and efficient design of the SolPal® ICS system offers an
extremely high price/performance ratio. Add to this its durability, and you get
a cost-effective system which will provide free hot water to your household
for years.
Single Collector Panel does not include any plumbing or
control components. It is intended for:
•
Add-on collector panels to Complete
System when additional
panels
are desired to increase capacity
• Large
commercial projects requiring multiple collector panels
• Replacement change-out of damaged or obsolete collector panels
• Custom
applications requiring only the use of collector panels
Easy installation - SolPal ICS systems are easy to install.
The solar collector and hot water storage tank are incorporated into a single,
compact casing. Installation is as easy as plumbing the cold water feed and hot
water return into your existing domestic hot water system. This is truly a
“plug & play” system.
More efficient than thermosiphon systems - When compared to
traditional thermosiphon systems, the SolPal ICS is superior in collecting heat
from the sun, and transferring it to your household water. And in areas where
direct sunlight is not always available, the water tank backup will supply hot
water for your household.
Sleek design - The SolPal ICS system offers a sleek profile
that follows the contour of your roof. Optimized visual appeal is achieved
through blending of form, function and material. Traditional thermosiphon
systems are bulky and do not blend in well with their surroundings.
Product Applications:
• For areas with lower water quality
• For climate areas where freezing seldom occurs
• It can be used as a
Stand-Alone system with no additional tank
or in combination
with other energy sources
SolPal Features:
• Integrated collector storage system
• Attractive design - compliments your roof
• Easy Plug and Play
installation - installs in half the time
• Easy to use
• Low maintenance
• High quality materials
• Optimal weather
resistance
• SRCC
OG-300 Certification
SolPal Specifications:
|
Technical
Specifications |
| Overall area |
25.8 sq. ft. |
| Dimension L x W x H |
86.0 x 43.3 x 8.3 in. |
| Weight (empty, excl. fastening) |
150 lb. |
| Volume |
51.5 gallons |
| Insulation |
1.18 in. PUR foam plate |
| Maximum temperature |
212° F |
| Maximum operating pressure |
4 bar |
| Heating element (optional) |
Optional (1 kW) |
| Connections |
2 x 3/4'' ext. |
| Installation |
Flat roof/pitched roof |
| Warranty |
10 years |
|
New Pipe with Plastic
Coating |
| Material |
Steel pipe with special high performance
powder coating |
| Layer thickness |
60 µm |
| Stoving temperature |
356° F |
| Color |
RAL 5015, sky
blue |
• Product Warranty: 10 Year
Limited Manufacturer Warranty
Cold Climate Applications:
Although SolPal is ideally suited for equatorial, tropical, sub-tropical,
and temperate applications, all SolPal kits can also be installed in colder
climates as a "Three Season" system. During the summer, and even in the early
spring and late fall seasons, a SolPal system continues to provide total, or a
substantial portion, of hot water requirements. Simply drain the system during
winter months when freeze proofing is required, and low sun levels do not allow
for efficient operation.
Freeze Protection:
The SolPal must be drained if
the temperatures fall to:
10°F for 6 consecutive hours, or
20°F
for 18 consecutive hours
When these environmental conditions are met or
exceeded, the SolPal must be manually drained in accordance with the
installation instruction. Failure to do so will void the warranty
coverage.
Technical Note for installations in colder
climates:
•
If using a FPV Freeze Protection Valve, use a FP35.
• A check valve must be used if a freeze prevention valve
is installed. It should be installed in the return solar loop piping below the
boiler drain to prevent short circuiting of the freeze prevention valve during
cold weather. Use a check valve that is designed for back-flow prevention when
installed in a vertical position
PLUG & PLAY Installation Video (Flat Roof)
The pre-assembled plumbing package shown in the video and manual is not
available in the U.S.; the plumbing kit includes U.S. approved parts which can
be assembled to meet the requirements of the installation.
Mounting Options:
Includes standard factory
flush/tilt mounting
brackets
(shown on image on left)
Flush Mount - underside of unit attaches directly to the mounting
surface. For tile roof applications where the tile roofing is installed around
the unit, or use with angled rack mounts.
Fixed Mount - aluminum
frame supports unit slightly above mounting surface. For shingle or tile roof
applications where a space is desired between the mounting surface and the unit
to allow for air flow and rain runoff.
Tilt Mount - aluminum
frame supports unit slightly above mounting surface, plus tilts collector to
desired angle for increased solar performance. Can also be used for ground
mounts applications [cement pad or footings required].
Flush mounting the collector to a pitched
roof:
Depending on the local installation codes, the
flush-mount hardware that comes packaged in the SolPal box might require
additional parts to comply with these codes. If your state requires that you
raise the collector above the roof on some sort of substructure, you can
select one of our System Mounting Kits, or you will need the following parts
to finish securing the collector to the roof (parts not
included):
• Unistrut rails for the
collector to rest on the roof.
• 5/16" bolts
with channel nuts & springs to secure the bottom of the SolPal 'L'
brackets into their unistrut rails. 1 each per connection needed (typically
need 6 connection points)
Product
Manufacturer: Solcrafte International, KIOTO Clear Energy
Note: All product performance tests and claims are that of
the manufacturer, not The Energy Supermarket.
_________________________________________________________
HELP » Contact Customer
Support
• Toll-Free
help line offering product info and ordering support
• Online e-mail technical and installation
support
_________________________________________________________
IMPORTANT
Delivery Note:
• Delivery truck driver will require handling assistance
to be provided by purchaser when unloading unit from truck. Liftgate service
available at an additional fee.
Processing and Delivery Information: Please allow Processing
Time as stated above for your order, plus standard transportation delivery
time. Orders placed after 2PM EST may not begin processing until the next
business day. Please call for Rush Processing and/or Rush Shipping
options.
