 Includes control unit, power cord, and sensors. Please
click below for other options:
Control
Unit
Control
Unit with power cord
Control
Unit with sensors
Goldline GL-30-LCO Solar Control Package with Power Cord and Sensors - 110
Volts
The Goldline GL-30-LCO
differential temperature control is designed to provide maximum operating
efficiency and flexibility to effectively manage today's innovative solar
energy systems. It is a continuation of the advanced electronic technology
which produced the popular C-30 and CM-30 controllers - standards of the solar
industry since 1975, with hundreds of thousands of units installed worldwide.
With an adjustable high limit of 50º-104ºF, the GL-30 is capable of
handling most differential temperature control functions for operation of
domestic water heating and sophisticated space heating and cooling. The GL-30
is designed to control recirculation, drain-back and closed loop
systems.
Replacement unit for CM30 and C30:
• Includes control unit, power cord, and sensors
NOTE: TD-GL & DIX-30 Temperature Displays are discontinued
LED Indicators
Three highly visible LEDs
show:
• Power to control
• Power out from control
• Power out from control due to a recirculation mode
to protect
• the system from freeze
damage.
GL-30 Output
The GL-30 output is rated at 20
Amps and is designed to directly
operate a pump or fan for heat collection
when the controller is sensing an appropriate temperature
differential.
Differential
The GL-30 has an
adjustable differential with a range of 8º to 24ºF. Solar systems with
long pipe runs normally require a higher
turn-on differential temperature,
and open loop systems with short pipe runs usually require a lower turn-on
differential temperature for optimum performance. The GL-30 offers versatility
to tailor controls to numerous specific systems designs.
Storage
High Limit
The GL-30 allows you to set a high limit storage
temperature from 110º to 230ºF.
Recirculation Freeze
Protection
Recirculation freeze protection, when enabled, turns the
GL-30
output on to circulate warmer storage water through the collectors
when near freezing temperatures are reached at the collector
sensor.
System Test Switch
The system test switch
manually switches the GL-30 to ON, AUTO,
or OFF for complete control over
the system at all times.
Product Application: Solar
Domestic Water Heating
System
_______________________________________________________
HELP » Contact Customer
Support
• Toll-Free
help line offering product info and ordering support
• Online e-mail technical and
installation support
_______________________________________________________
A
complete typical solar domestic water heating system components and layout
is shown below.
Product Features:
•
Differential temperature control
•
8-20ºF adjustable turn-on differential
•
4ºF fixed turn-off differential
•
110-230ºF adjustable high limit
•
120/240 VAC input
• 20A, 2HP output
Product Specifications:
•
Input power: 120 VAC or 240 VAC
•
Output: SPDT powered contacts 1HP@115VAC,
2HP@240VAC
• rating @ 240VAC: 20A on NO contacts ; 10A on NC
contacts
• Differential: 8/4
to 24/4°F
• High Limit: 110°
to 230° F
• Environment: 15°
to 130° F; 0 to 95% rH
• Accuracy:
+/- 1°F
• Dimensions:
5.875" x 4.875" x 2.375"
• Temperature
Sensors: Thermistor 10k @ 25°C/77°F not
included
Inside
view
of the
circuit
board
Product
Installation:
View the following manual for installation and
troubleshooting
Download » Installation
Manual
Download
» Goldline
Warranty
General
Control and Sensor Trouble-Shooting Tips:
All of the GoldLine
(formally Independent Energy) controls (including C30, CM30, G30 and GL30
series) and some of the Heliotrope General (HG) DTT series controls
incorporated the use of 10k sensors. Some of the earlier HG controls and
some other lesser known brands used 3k sensors.
To determine the type of
sensor, the resistance must be measured in ohms (using a volt/ohm meter) when
the sensor is at 77 degrees F. 10k measures 10,000 ohms and 3k measures
3,000 ohms. As the temperature goes up, the resistance goes down.
Resistance can be checked at any temperature, and then
convert the
ohm reading measured to the temperature equivalent
by using the conversion
chart.
Sensors can be purchased at
Water Heaters Parts and
Supplies
Product
Manufacturer: Goldline Controls Inc.
Product Warranty:
10 Year Limited Warranty
Goldline Controls Inc. now offers a full 10
year limited
warranty on all solar controls and accessories! This
warranty
will cover repair or replacement of the control at no cost
for
the first 24 months. For years 3 through 5, the repair/
replacement
fee will be a maximum of 25% of the current list
price, and for years 6
through 10, the repair/replacement fee
will be a maximum of 50% of the
current list price. The best
controls now have the best warranty. See the
Goldline
warranty statement for
detail.
_______________________________________________________
Processing and Delivery Information: Please allow Processing
Time as stated above for your order, plus standard transportation delivery
time. Orders placed after 2PM EST may not begin processing until the next
business day. Please call for Rush Processing and/or Rush Shipping
options.
|
