 Hayward 3-Way Motorized Valve
(Previously
Goldline)
This 3-way full flow PSV diverter valve makes water flow management simple
and easy. Sturdy CPVC construction ensures a long life and resistance to
higher temperatures. The handle is removable without tools and allows for
quick and easy port customization.
Hayward Valve
Features:
• Designed for easy
automation using Hayward 3-Way Actuator
• Available in standard 1 1/2" - 2" and 2 - 2 1/2" sizes
• Temperature and chemical resistant CPVC
material
• Removable handle for easy port
customization
• 1 Year Manufacturer's
Warranty
Applications:
• Solar Heating System Control
• Gas Heater Bypass Valve
• Heat Pump Bypass Valve
• Pool/Spa Valve Combinations
•
Fountains/Waterfalls
Technical
Specifications:
The 3-Way Hayward valve is available in
standard size 1 1/2" pool input to 2" solar system connection, or in the
oversized 2" pool input to 2 1/2" solar system connection.
• 1.5 inch I.D. / 2 inch O.D. – Plumb
1.5” PVC pipe into the valve
• outlet or put a
2” Fitting over the valve outlet.
• 2
inch I.D. / 2.5 inch O.D. – Plumb 2” PVC pipe into the valve
• outlet or put a 2.5” Fitting over the valve
outlet.
Solar Heating System Control
Application:
The 3-Way valve works in conjunction with either of
the Hayward controller models, and is remotely operated using the
Hayward Actuator.
When the controller is signaled by the sensors, and calls for solar heat
pick-up, the 3-Way valve immediately activates. The opening "diverter"
valve then directs the flow of circulation through the solar collectors using
the pool's filtration pump.
Note: For a positive solar shutdown, or service to
collectors during pump operation cycle, an isolation ball or gate valve must be
used on the feed line for positive shut off.
All valves come with
Positive Seal; for non-positive applications, it is necessary to remove the
seal. ____________________________________________________
Hayward Actuator for 3-Way
Valves Model JVA-24
Straightforward and uncomplicated
to operate, Hayward 3-Way Actuator is engineered to operate both
2-way and 3-way valves, and can be installed using only a screwdriver.
An adjustable cam gives Hayward's actuator more flexibility than many
of the other actuators on the market.
Offering the highest
torque output in the industry, with 22 oz per inch for maximum valve control
ability and top solar panel performance.
Technical
Specifications: The Hayward Actuator for 3-Way valves
incorporates bi-directional design for installation flexibility, plus a
180 degree rotation with 90 degree increments. Compatible for easy
adaptation to 2- or 3-way valves. With energy-efficient design and
universal sizing, the Hayward Actuator
fits most valves.
Unit includes
service switch for quick service access [some
models].
The Hayward Actuator comes with 15 feet of heavy-duty
cable
prewired for installation. UL and CSA certification.
Assembly
of Hayward Actuator to the Hayward 3-Way
Valve
In three easy steps the Actuator can
quickly be attached to the top
of the 3-Way Valve by any
handy-person using a screwdriver:
1.
Before attaching the Actuator to the 3-Way Valve, the Handle
must be removed from the Valve. To remove the Handle, turn the
thumb-screw by hand counterclockwise until removed, and then
slide
the Handle straight up and off the Valve Handle's spline.
2.
Next determine the Actuator's proper orientation in relationship
to
the Valve's directional flow [per instruction manual]. Remove
the
four screws from the Valve body. Align the Actuator spline with
the
Valve spline, and push the Actuator onto the Valve spline. Use the
four extra-long screws [included] to bolt the Actuator to the Valve
where the four standard screws were removed.
3.
Place the Valve's Handle onto the Actuator spline, and re-insert
the
thumb-screw turning clock-wise.
The assembled units should
resemble the image below.
Note: The Valve could be in any one
of three possible positions in
relationship to the Actuator, depending
on the exact application.
The
diagram below shows a line drawing of the Actuator from a top
view
[left], and a side view [right] - with arrows indicating the four
holes used in attaching the Actuator to the Valve.
The diagram below shows a line drawing of the assembled units;
on
top is the Handle retained on the shaft with the
thumb-screw.
Next is the Actuator, and underneath is the
Valve, joined together
using a screwdriver with the four
extra-long screws provided.
Product Warranty: 1 Year Manufacturer Warranty
Product Manufacturer: Hayward Industries,
Inc.
__________________________________________________________
HELP » Contact Customer
Support
• Toll-Free help line offering unit selection assistance
•
Online e-mail technical and installation support
__________________________________________________________
Note: All product performance tests and claims are that of
the
manufacturer, not The Energy Supermarket.
Processing and Delivery Information: Please allow Processing
Time as stated above for your order, plus standard transportation delivery
time. Orders placed after 2PM EST may not begin processing until the next
business day. Please call for Rush Processing and/or Rush Shipping
options.
|
