Titan SCR3
Electronic Tankless Water Heater

The new Titan-SCR-3 incorporates the new QUAD-4 technology featuring an improved electronic proportional control system, with dual stages of control in response to broad variations in the amount of water flow.

The Titan SCR-3 has been specifically designed for new apartment complexes, where the lower line voltage of 208 VAC in the mains has been recently implemented. It was also designed and tested for optimal operational performance, with modern bathroom fixtures that feature such characteristics as Press Balancing Mixing Valves, and Flow Restricted Single Handle Valves.

The Titan- SCR-3 is particular more efficient and more accurate in the setting and stability of the outlet water temperature, under lower main voltage condition (208 VAC), and in modern flow restriction bathroom fixtures. It has also capable of outstanding operation under normal line voltages of 220/240 VAC, providing the same high efficiency and accuracy.

Product Applications:
• For new apartment complexes with lower line voltage of 208 VAC
• For bathroom fixtures that feature Press Balancing Mixing Valves
• and Flow Restricted Single Handle Valves

Product Benefits:
• Enjoy endless showers
• Never run out of hot water
• Save up to 60% on water heating costs
• Compact design, reclaim your space
• Compact design allows installation almost anywhere
• Quick and easy installation requiring no venting
• Space age NASA technology
• Environmentally friendly
• Quality made in the USA
• Industrial grade performance
• Serving the market since 1986 

Titan SCR3 Specifications
Compliance	UL # 499
Standards	ANSI
Tested	Applied Research Lab # 29-580
Technology	New “Quad-4” Power Modulation and Control
Dimensions	7" W x 10" H x 3 D
Weight	9 lbs.
Materials	Brass and Copper Interior / Steel  Casing. No Plastics Used
Pipe Fitting	1/2" Standard Pipe
Pressure Requirements	5 PSI-Min/150PSI-Max
Voltage	208-240 volts
Elements	Dual Nichrome
Energy Efficiency	Up to 99.5%
Activation	0.4 GPM-on/0.3 GPM-off
Indicators	red-on/Green-Stand by
protection	Dual Microtemp Thermistor- Manual Resettable Thermostat

 

Electrical Requirements
Model	Max Kw @ 240V	Volts	Max Amps
N-160	12kW	208V	55
N-160	16kW	240V	66

Requirements:
1 Wire # 6
1 Double pole 70 Amps Breaker

Product Warranty:
• 10 years on casing, 1 year on components
Titan Tankless Water Heater Warranty [Pdf format]

Product Installation:
• Vertical Installation only.
Click on the following for important installation information:
Titan Tankless Water Heater Installation [Pdf format]

Hot Water Energy Conservation
One way to save on domestic hot water bills is to use Demand Type Water Heater. A conventional hot water system heats water in a tank to a specified temperature. As heat is lost from the tank, the water is reheated until it reaches the specified temperature again. For most of the day the water in the tank is not used, but it loses heat continually. Demand Water Heaters eliminate this problem by heating water only as hot water is drawn.

Avg./gal. hot water per/usage
Shower	20
Bath	20
Hands and face washing	4
Shaving	2
Hair Shampoo	4
Hand dishwashing	4
Automatic dishwashing	14
Food Preparation	5
Automatic Clothes Washer	32

Click here for Water and Energy Conservation Tips

Product Manufacturer: Niagra Industries, Inc.

 IMPORTANT NOTICE
• Check specifications and installation requirements on unit used.
• Voltage, Amperage, Breaker, and wire size may vary depending on
• local electrical standards, consult an electrician for guidance. Plastic
• pipes are not recommended for proper installation.
• The electrical specifications are based on 208 volts. It should be noted
• that higher voltage will increase power, just as lower voltage will have
• the reverse effect. User must determine the suitability of the unit for
• their application.
• Do not over heat water. Water temperature from 105º F to 120º F is
• adequate for all practical purposes.

__________________________________________________


HELP » Contact Customer Support 
• Toll-Free help line offering sizing support
• Online e-mail technical and installation support

____________________________________________________

Return Policy
All Tankless Water Heaters are tested at the factory just prior to shipment. It is the customer's responsibility to determine if sufficient electrical capacity exists to install the water heater prior to placing the order [See Tankless Water Heater Installation Guide]. Unit sizing must be determined by the customer using the temperature rise chart based on the required flow rate.

A 20% restocking fee will be applied to returns of new units in original packaging (see policy page for instructions). The shipping cost will not be refunded. Once the Tankless Heater has been installed it cannot be returned.