Helio-Pak PRO Solar Water Heating and Space Heating Combination System for 2 to 3 people includes four 4x10 collectors
Water & Space Heating combination systems provide the greatest efficiency, maximizing the most from the sun. With the combined approach, any heat not used for hot water consumption is automatically diverted for space heating.
The Helio-Pak Pro (with pre-installed Delta-T Pro controller) further enhances the residential solar hot water system with the addition of user-friendly customizable settings, remote navigation, and expanded system performance data.
Product Features
"Plug & Play" installation
All components included (less piping)
Combined modular design
Solar hot water module included
Suitable for all climate regions
Fully protected from overheating and freezing
Image above shows three collectors and one tank. This system includes 4 collectors and two storage tanks..
Complete System Includes:
1. Helio-Pak heat transfer appliance
with built-in Delta-T Pro controller
2. 2 Tanks with pre-installed port for interconnecting multiple tanks
3. 4 Gobi "blue sputtered" solar flat plate collectors
4. Collector mounting hardware
5. Expansion Tank
6. Glycol
7. Solar Hot Water Module
8. Dyn-O-Seal discs unions
9. Air vent kit
10. Dos combo fitting (includes temperature sensor and sensor well)
Grundfus Flow Sensor
Wi-Fi Hub
The GOBI Solar Collector
The GOBI line of solar flat-plate collectors is one of the industrys highest-rated. Over 30 years of design and engineering refinement have gone into making it a world-class performer for heat output, efficiency, and durability. The collector is available in three sizes, with two surface types to choose from (blue sputtered and black paint), making it suitable for all types of solar heating applications.
Collector Features
Low-profile tapered design for a subtle rooftop presence
Optimal heat absorption and overall efficiency
Certified to withstand 50 lbs. per square foot
Anodized aluminum frame improves durability & rigidity
No-solder connections with factory installed DYN-O-SEAL unions
Rated by SRCC and IAPMO as one of the industry's best-performing collectors
Collector Absorber Surface
Helio-Pak Combination systems come standard with blue sputtered coating for optimal heat absorption with minimal emission
Suitable for all types of installations and regions
Recommended for cool climates
Solar Hot Water Module
The hot water module guarantees you a constant supply of fresh hot water by means of a temperature regulation system, which avoids annoying delays and temperature fluctuations.
(SHWM 005 000) 5.3 gallons per minute
Solar Storage Tank Features
Glass lined tank
Twin 3/4" magnesium anode rods
Factory-installed brass drain valve
Pre-installed ports for interconnecting multiple tanks
2" Non-CFC foam insulation (R-16)
Steel external jacket
(HSTG 119 000) Two 120 gallon tanks
Delta T PRO Control Unit
Model DLTA 000 001 Direct ethernet plug in
Specifically designed to regulate the operation of a solar heating system, the Delta-T monitors collector and storage temperatures and automatically turns pumps on or off when the right temperature is reached. The controller can also provide additional functions, such as system freeze- protection, by recirculation and storage tank high-limit shut-off.
The Delta-T Pro contains all the basic functions of the Delta- T, but adds much more. The Pro unit is an exceptional addition to any residential solar hot water system. Its full potential is utilized in larger commercial installations where system performance and monitoring is critical.
Delta T PRO Features
Exportable energy data
Fully adjustable system settings
Variable speed pump operation
Zone pump operation
High capacity relays
120/240 VAC, 50-60 Hz power
Delta T PRO Specifications
8 Sensors (7-Temperature & 1-Flow )
Relay power (1Hp motor, 125 VAC @ N.O. contact)
Realtime clock
Software included
Expansion Tank
(EXPT 005 000) 5 gallon tank
DOS Discs & Air Vent
Dyno seal union with disc for interconnecting collectors
Glycol
Glycol amount provided based upon piping round-trip length of 100 feet. Additional glycol is needed if piping exceeds 100 ft. or pipe diameter is increased.
Mounting Hardware
Includes Flush Mount kit or Rack Mount Kit
|
Helio-Pak PRO Solar Water & Space Heater
Specifications - For 2 to 3 People |
| Floor Coverage Area |
1500 ft2 |
| Gobi Collector |
4 GOBI 410 001S |
| Gobi Collector Surface Area |
160.6 ft2 |
| Helio-Pak |
HPAK 024 000 |
| Solar Hot Water Module |
SHWM 005 00 |
| Solar Storage Tank |
HSTG 119 000 - 120 gal. x 2 |
| Controller (Delta- T) |
DLTA 000 001 |
| Flow Sensor |
Grundfus |
| Wi-Fi Hub |
Included |
| Expansion Tank |
EXPT 002 000 |
| DOS Discs & Air Vent |
Included |
| Glycol** |
5 gal |
**Glycol amount provided based upon piping round-trip length of 100 ft. Additional glycol is needed if piping exceeds 100 ft. or pipe diameter is increased.
Packaged systems estimated to produce an average solar fraction up to 60% for domestic hot water and up to 50% for space heating, provided the following installation guidelines are followed:
1. Collectors are mounted at the ideal angle of 45 degrees
2. Collectors are mounted due south +/- 15 degrees
3. The collectors are free of shading from nearby obstacles
How It Works
When there is sufficient heat to be drawn from the collectors, the controller automatically activates the pumps. Heated solar fluid is then circulated from the collectors, through the heat exchanger where its heat is transferred to water in the storage tank. The solar liquid is then pumped back to the collectors to once again be reheated. This circulation loop will continue as long as there is heat to be drawn from the collectors.
The solar heated water in the storage tank is available for distribution to the house heating system directly. When there is a draw for domestic hot water, the solar hot water module will heat fresh cold water by transferring the heat from the solar storage tank to the fresh cold water. During times when there is little or no sun, a backup heating system will be activated to provide adequate hot water for space heating and domestic use.
Packaged systems estimated to produce an average solar fraction up to 60% for domestic hot water and up to 50% for space heating, provided the following installation guidelines are followed:
1. Collectors are mounted at the ideal angle of 45 degrees
2. Collectors are mounted due south +/- 15 degrees
3. The collectors are free of shading from nearby obstacles
Download » Solar How Water and Radiant Heat Diagram (PDF)
Learn More » How it works, components, diagram (PDF)
Product Warranty: 5 Year Limited Manufacturer Warranty
Product Manufacturer: Heliodyne, Inc.
_________________________________________________
HELP » Contact Customer Support
Toll-Free help line offering system selection support
_________________________________________________
*Shipping Cost:
Shipping amounts may vary due to fluctuations in the transportation industry. Final shipping costs may need to be adjusted during order processing. If there is a change in the total shipping cost you will be contacted for approval before the order is finalized.
Delivery Information: Please allow 3 to 6 weeks for orders to be processed and the kit to be assembled, plus standard transportation delivery time.
IMPORTANT Delivery Note:
Delivery truck driver will require handling assistance to be provided by purchaser when unloading unit from truck. Liftgate service available at an additional fee.
Note: All product performance tests and claims are that of the manufacturer, not The Energy Supermarket.
