Clearance: Older model units. Only 3 available. This sale is final; no cancellations or returns.
The Current Cost Web Bridge device allows you to send your real time data of
energy usage to compatible web portals, including Current Cost online data
portal, by connecting your ENVI monitor
to your modem or broadband connection.
The Bridge connects the Envi directly to the router with an Ethernet cable.
This will allow automatic uploading of data to the web. The web bridge includes
one power supply capable of powering both the bridge and the Envi display.
Includes 4' Ethernet cable and 10" display to bridge connector.
• 5 Watt power supply powers the Web bridge and
• A 10 inch bridge cable connects
the Envi display to the bridge
• A 4 foot
Ethernet cable connects the bridge to a router
Product Application: To be used with the ENVI
|9VDC, 300mA, 2.1mm center positive. Power
can also be provided using the USB port. |
|100mm x 76mm x 41mm |
|Serial communication over USB with debug
output. USB can also be used for powering the prototype bridge.|
Automatic Software Reset
|The bridge can be reset by unplugging the
power from the bridge, wait 5 seconds, then re-connect the power to the bridge.
This will do a clean reset of the bridge, which will then cycle through setting
up DHCP and communicating with the Current Cost broker.|
|16 KB of flash memory|
|512 bytes (ATmega168)|
RJ45 Ethernet port:
|The RJ45 Ethernet port has two LEDs:
Link/Act and 10/100. |
The Link/Act LED should be on when
connected. If the Link/Act LED is not ON, this usually means there is a bad
network connection or bad cable. More details about LED
||LED: Link Activity
GREEN = link active BLINK = network activity OFF = link
Baud Rate / Network Speed AMBER =
100Mb OFF = 10Mb
Not compatible with the
Installation Instructions: PowerSave Web Bridge
Product Manufacturer: Current Cost, Ltd.
HELP » Contact Customer
Toll-Free help line offering customer support
Online e-mail technical and installation support
Processing and Delivery Information: Please allow Processing
Time as stated above for your order, plus standard transportation delivery
time. Orders placed after 2PM EST may not begin processing until the next
business day. Please call for Rush Processing and/or Rush Shipping