 Pool Pilot Digital NANO - Salt-chlorine Generator Kit, an 
alternative to chemical use. Made by AutoPilot
Pool Pilot Digital NANO - Salt-chlorine Generator Kit, an 
alternative to chemical use. Made by AutoPilot
115 Volt
Pool Pilot Digital Nano features include microprocessor controls with a 
digital read-out of pool water  temperature, current salt level, purifier 
production level and more. It also tells you how much salt to add should it run 
low. The Nano will maintain pools up to 20,000 gallons with the RC-35/22 
patented manifold.
Product Function: The Pool Pilot NANO is designed 
to soften and purify swimming pool water, provides hassle-free pool 
maintenance.
Product Application: For smaller 
residential pools up to 20,000 gallons. For larger pools please click here
A Pool Pilot system will eliminate the discomfort and inconvenience of harsh 
chemical reactions like red eyes, green hair, irritated skin or faded swimwear. 
Pool water will retain constant low-levels of ph-balanced chlorine that purifies 
the water while making it soft and silky to the touch. 
Product Benefits
• Crystal 
clear water every day, the natural way
• Simple 
to install and simple to use
• Never buy 
chlorine again
• Soft, silky water
• No more red eyes
• No 
more itchy skin
• No more green hair
• No more vacation worries
• No more faded swimwear
• Energy efficient
• 
Environmentally friendly
• Automatic cell 
cleaning
Product Features
• Maintains 
pools up to 20,000 gallons
• Produces 0.8 lbs. 
of chlorine per day
• Patented temperature 
compensation
• 24 & 72 hour boost 
cycles
• Operates at all salt levels - 
2,000-35,000 ppm (2 to 35 g/L)
• Operates in 
water up to 104ºF/40ºC
• Push button 
controls
• Operates at flow rates less than 15 
gpm
________________________________________________________

Digital Display Readout
• 
Salt level
• Amount of salt to add
• Water temperature
• 
Diagnostics
________________________________________________________
How the Salt-Chlorine Generator Works
The system requires 
a low concentration of dissolved salt (sodium chloride) in the water. The salt 
concentration level is normally maintained below the taste threshold. The Nano 
automatically converts the salt into chlorine, which your pool/spa requires to 
remain sanitized and algae free. The chlorine reverts back to salt after 
treating the water. Since the salt is constantly recycled, there is minimal loss 
during a swimming season. However, salt can be lost due to filter backwashing, 
rain water overflow, leaks, or bather splashing/ carry out... but not through 
evaporation.
The Digital Nano is designed to handle the purification 
needs of residential swimming pools and spas. The amount of chlorine required 
for proper sanitization will vary based on the pool size and various factors 
such as water temperature, bather load, exposure to direct sunlight, and special 
water features. The water circulation pump must be operating for your Nano to 
produce chlorine, so run time is one of several key components to maintaining 
the proper sanitizer levels. 
Most installations require a minimum of 
eight hours-per-day pump run time to properly filter and sanitize the water.
________________________________________________________
Pool Pilot Patented Bypass Manifold
AutoPilot's patented 
bypass manifold is a pre-assembled unit designed to control the flow rate 
delivered to our cell. The spring check valve in the manifold allows excess 
flow, over 20 gpm, to by-pass the cell. The water in turn flows at a controlled 
rate through the cell where it is super chlorinated. The in-line strainer on the 
inlet side of the manifold protects the tri-sensor and production cell from 
debris that might bypass the filter. The location of the strainer next to a 
connection union makes periodic cleaning easy. The design of our patented bypass 
manifold guarantees optimum chlorine production and simplifies the installation 
process of the AutoPilot® Purifing System.

Manifold features include
1.) In-line Strainer - The in-line strainer protects the 
Tri-Sensor and the Cell from debris that may by-pass the filter and obstruct 
either component. The location of the strainer in the connecting union makes it 
easy to remove for periodic cleaning.
2.) Tri-Sensor - The tri-sensor is a three way sensing 
device which measures flow, salt level, and water temperature.
3.) Chlorine Production Cell - The cell produces 100% pure 
Sodium Hypochlorite in your pool plumbing returning it to your pool.
4.) Check Valve - The check valve in the Manifold allows all 
water flowing through the plumbing at a rate greater than 20 gallons per minute 
to by-pass the production cell to maximize the production of 
chlorine.
__________________________________________________
HELP » Contact Customer 
Support
• 
Proper product selection supported by customer service agent  
• Toll-Free help line and/or online e-mail tech 
support 
• Step-by-Step Factory 
Customer Support Help Line
• for personal assistance 
with Installation/Setup Programming!
• Toll-Free  1 800 922 6246 
____________________________________________________ 
 
Processing and Delivery Information: Please allow Processing 
Time as stated above for your order, plus standard transportation delivery 
time. Orders placed after 2PM EST may not begin processing until the next 
business day. Please call for Rush Processing and/or Rush Shipping 
options.