Eagle 2 Digital Solar Control Package for PV Powered Pumps
• For PV Panel Powered
Applications 4-22VDC
• With 6 AMP Solid State
Relay Grounded Contacts
• Powered Required .60
Watts or 250 mili-watts
with no back light enabled
• Includes 2 Sensors
Model SOLR-2EDW-D2 is a PV panel powered controller with a 6 amp solid state relay with grounded contacts. Powered required is is 0.60 watts or 250 mili watts with 6 amp SS relay. No back light enabled, consumption is 250 miliwatts.
Eagle 2 Differential Controller - Standard Features
• Microprocessor accuracy and dependability with ambient
operation from -10 to 120°F
• Large easy-to-read 40 character (20x2) backlit LCD
display showing every parameter measured and controlled by
the microprocessor.
• PC DATA PORT with built-in transmitter allows optional
adapter and up to 500 ft. cable to interface with computers for
ease in startup and remote diagnostics. Or, for adding an
optional large 80 character (4x20) backlit LCD display
remote-mounted up to 150 ft. distances with a CAT-5 cable.
• Long-term diagnostics and data logging is possible using
communications software that's included in Windows’ OS.
• Fault LED indicators for quick servicing and diagnostics
• Fast and easy installation with "screwless" sensor
terminals and easy access for all other wiring
• Electrostatic discharge protected
• One HP or 20 AMP high reliability relay
• Polyester coated 16 gage rugged steel enclosure
• Model available with 1/2”
conduit holes for higher current permanent wiring
• 2 industrial 400°F (204°C) rated 10K thermistors with +/- 1°F
accuracy are included
• Two auxiliary thermistor inputs for optional sensors that can be
located up to 1000' away
• Selectable overrides for low temperature shut down or freeze
protection modes for safe operation
Eagle 2 Models come standard with 2 sensors
Optional AC Adapters - Include two 8 amp DIODES:
• 7750-0012 Power Supply, 18W, 12VDC at 2.5 amps - Used as PV power backup
• 7087-0013 Battery Charger, 13.5VDC at 1.5 amps - Used as battery charger and power backup
LCD DISPLAY
The LCD display has 2 lines of 20 characters each. The first line permanently displays the COLLECTOR and the STORAGE temperatures. The second line can be paged by pressing the button located just below the LCD display.
Eagle 2 Differential Controller - DC Models Features
DC operated controllers available for "12VDC" Battery operation or from direct PV panels. Relay options are from 5 AMPS to 30 AMPS. Power consumption is 2 watts for model D1 and 1/4 watt for model D2. D2 PV POWERED from 0 VDC to 22 VDC with SMART power management at very low PV power levels. A must for soft PUMP starts and smooth controller operation. Electrostatic discharge protected.
|
Eagle 2 Specifications |
| Input Power: |
2 watts @ 120 VAC |
Output Relay:
|
NO contact: 20 Amp, or 1 HP @ 120 VAC with 30 sec ON delay
NC contact: 10 Amp or 1/3 HP |
| Differential: |
8/4 to 24/4 ºF |
| High Limit: |
110 to 200 ºF |
| Accuracy: |
+/- 1ºF |
| Environmental: |
-10 to 120ºF 0 to 95% RH |
| Sensors: |
10K @ (25ºC) 77ºF |
| Dimensions: |
5.00" W x 6.12" H x 2.50" D |
Donwload » Eagle 2 Warranty
Eagle D2 PV Powered » Service and Installation Instructions
Product Manufacturer: IMC Instruments, Inc.
_______________________________________________________
HELP » Contact Customer Support
• Toll-Free help line offering product info and ordering support
• Online e-mail technical and installation support
_______________________________________________________
A complete typical solar domestic water heating system components and layout is shown below.
_____________________________________________________
Processing and Delivery Information: Please allow Processing Time as stated above for your order, plus standard transportation delivery time. Orders placed after 2PM EST may not begin processing until the next business day. Please call for Rush Processing and/or Rush Shipping options.
