Pool Pilot -
Pool Pilot's SuperCell is
the electronic unit that makes your chlorine as salt particles pass by it during
your normal filtration periods.
Product Benefits: Extend the service life of your Pool Pilot
by replacing the Conversion Cell instead of the entire unit.
Titanium blades for optimum
Automatic "soft-reverse polarity"
Step-by-Step Factory Customer
Support Help Line offering personal
assistance with conversion cell
All Cell models come pre-assembled with a
Patented Automatic Flow Bypass Manifold Assembly. The manifold must be located
as the last component in the POOL RETURN LINE only. For pool/spa combinations or
special plumbing configurations, please contact the factory for assistance in
locating the manifold.
The Patented Automatic Flow Controlled Manifold is
designed to control the flow rate delivered to the production cell. The water in
turn flows at a controlled rate through the cell where it is super chlorinated.
The design of the Manifold simplifies the installation of the Autopilot
Genuine OEM parts, not
Manifold features include:
Inline Strainer - The in-line Strainer
protects the Tri-Sensor and
the Cell from
debris that may by-pass the filter and obstruct either
component. The location of the strainer in the connecting union
makes it easy to remove for periodic cleaning.
Tri-Sensor - The Tri-Sensor is a three way sensing
measures flow, salt level, and
cold water temperature.
Cell - The cell produces 100% pure
Sodium Hypochlorite in your pool plumbing
returning it to your
Valve - The check valve in the Manifold allows all water
flowing through the plumbing at a rate greater than 20
minute to bypass the production
cell and maximize the production
2 Year Manufacturer Warranty
Warranty only applies to
these items when purchased from authorized dealers with AutoPilot. Solar Direct
is an authorized dealer.
Product Manufacturer: AutoPilot Systems, Inc.
HELP » Contact Customer Support
Toll-Free help line offering product info and ordering
Online e-mail technical and
cost-of-operation evaluations and comparisons
Model RC-35/22 - Previously Model SC36
RC-42 - Previously Model SC48
RC-52 - Previously Model SC60
RC-35/22 Replacement Cell with
For pools up to
when used with Digital, Soft Touch or Total
Control Power Supplies.
For pools up to
when used with the Digital Nano or AG Power
RC-42 Replacement Cell with
For pools up to 42,000
RC-52 Replacement Cell with Unions
For pools up to 52,000 gallons
Your Pool Pilot System is adaptable
for use with either the RC-35/22, RC-42, or RC-52 residential cell. The
SuperCell can be easily replaced, simply unplug the wiring cable and turn the
two unions to remove, install the new cell, tighten unions and insert
Product Service and Maintenance:
is installed with Unions on each end of the cell to allow quick and easy
removal. Loosen the unions and remove the cell from the plumbing.
The titanium Cell blades, seen inside the Cell
body, should be straight and clear of any debris between the blades.
Pool Pilot is designed to automatically self-clean calcium scale build up within
the Cell. This is seen as a white flaky or crusty build-up on the edges or
between the blades and will pre-maturely deplete the life of the cell. Certain
conditions can cause a heavier scale build up that exceeds the self-cleaning
capability and would need to be cleaned manually by the method described
We recommend using Lo-Chlor Salt Cell Protector
Plus as a preventive additive to help soften and reduce the build-up of
scale deposits in the cell. Lo-Chlor also reduces scale on exposed aggregate and
new pool finishes and enhances chlorine production.
With the Cell removed as described above, use a
high-pressure hose nozzle to spray off as much loose scale and debris as
Any remaining calcium scale can be treated with a mixture of one
(1) part Muriatic Acid into four (4) parts water.
Mix the solution in a
pail, high enough to cover the Cell blades.
Remove the Cell cord and immerse
the Cell so that the blades are completely covered in the solution for no more
than 15 minutes intervals.
Drain and flush with fresh water and re-inspect.
Repeat the immersion if necessary.
ADD ACID TO WATER, never water to acid.
NEVER USE ANY SHARP OBJECTS TO REMOVE
SCALE. Scraping or scratching the titanium blades edge or surface will allow
chemical attack of the blade and cause premature failure of the Cell and will
void your warranty.
Filter Backwashing: We recommend
turning off the circuit breaker on the Professional when backwashing the
Star Rating system is the direct result of experience with well
over 4000 actual units in the field in the homes of our customers.
The criteria are:
Quality of Materials and Workmanship
Reliability and frequency of repairs
Factory response to service or warranty issues
Strength of the warranty
rating certification by industry accepted test
Processing and Delivery Information: Please allow Processing
Time as stated above for your order, plus standard transportation delivery
time. Orders placed after 2PM EST may not begin processing until the next
business day. Please call for Rush Processing and/or Rush Shipping