Eagle 2 Thermal Energy Meter and Differential Temperature Control
Connect to the Web:
Connect the Eagle Energy Meter and solar temperature controller to Wired Solar* for real-time Killowat hours and BTU monitoring to measure system performance and on-the-spot remote troubleshooting.
Connect to Computer:
An optional stand-alone PC based software package is also available; the Solar BTU Log can be installed in a local computer and connect to collector using using Adapter #SOLR-DA10 to monitor data log in graphical form and long-term data collection.
Temperatures, pump activity and totalized Btus are transmitted in real-time to a computer or the web for a trend graph including calculated BTUs or kilowatts that are displayed in hours for remote or later viewing.
*Wired Solar services are not included in price.
Eagle 2 Energy Meter and Solar Control Features:
Includes a full featured differential controller with an isolated serial
interface which can be permanently connected to a PC for data logging and a Flow meter “plug and play” interface. The controller displays GPM and Kilo-watt hours of collected energy.
The BTU calculations have bee carefully programmed to take into account the effects of Glycol-water mixtures. The Processors are permanently programmed to a specific percentage of Propylene Glycol present in the heat transfer solution from 0 % to 100%.
Precision Matched sensors included to with in 0.2F which are essential for accurate BTU calculations. The matching was been tested and verified over the range of 80F to 210F in our precision temperature baths for each set of sensors supplied with each BTU / Controller. Connecting cables to both sensors have to also be matched with in 1.5 ohms of each other in the field. Cable length equivalency = 18Ga.>75 ‘, 20Ga.>35’. 22Ga.>20 feet
_______________________________________________________
Flow Meters sizes:

Flow Meter Size 1/2" and 3/4" |
 Flow Meter Size 1"
|

Flow Meter Size 1-1/2" |

Flow Meter Size 2", 3" and 4" |
Models 200F Max |
Meter Size |
EMP1-0050 |
1/2 inch |
EMP1-0075 |
3/4 inch |
EMP1-0100 |
1 inch |
EMP1-0150 |
1-1/2 inch |
EMP1-0200 |
2 inch |
Models 250F max
|
Meter Size
|
EMP2-0050 |
1/2 inch |
EMP2-0075 |
3/4 inch |
EMP2-0100 |
1 inch |
EMP2-0150 |
1-1/2 inch |
EMP2-0200 |
2 inch |
EMP2-0300 |
3 inch |
EMP2-0400 |
4 inch |
|
|
_______________________________________________________
LCD DISPLAY
The LCD display has 2 lines of 20 characters each. The first line permanently displays the COLLECTOR and the STORAGE temperatures. The second line can be paged by pressing the button located just below the LCD display.

DATA-PORT
Requires an IMC Data-Port Adapter that will allow interface to a standard computer’s serial RS232 port. The adapter can also accept a serial to USB converter to connect directly to portable computers that only have USB ports.

Port Adapter Model SOLR-DA10
Send all data for graphical presentation to a computer using a PC Data RS-232 (non isolated) Port Adapter. It connects directly to the Eagle 2 WEB controller data port and permits serial PC communication at 2400 BAUD rate. Electronics are in the handle for long-distance transmission. Sample graph.
If wireless operation is desired for short distances, Blue Tooth transceiver can also be connected. The rate at which the data is sent from the EAGLE solar controller is determined by a jumper in the controller.
Eagle 2 Energy Meter Specifications |
Input Power: |
2 watts @ 120 VAC* |
Relay Contact Ratings: |
#832 UL #E88991, CSA #1429333 Common (CM)- 30VDC MAX. or 250VAC MAX.** Normally Open (NO)- 20A resistive*** @ 120VAC & 250VAC** 1 HP @ 120VAC; 2 HP @ 250VAC** 20A @ 30VDC**; TV-5 Normally Closed (NC)- 20A resistive*** @ 120VAC & 250VAC** 1/4 HP @ 120VAC; 1/2 HP @ 250VAC** 15A @ 30VDC** |
Relay Action: |
30sec delay ON; no delay OFF |
Differential: |
Adjustable 8 to 24 F; fixed 4 F reset |
High Limit: |
Adjustable from 110 to 200º F |
Accuracy: |
+/- 1ºF |
Environmental: |
-10 to 120 F @ 0 to 95 %RH |
Sensors: |
10K @ 77 F (25 C) Rated to 400 F |
Dimensions: |
5.00”W x 6.12”H x 2.50”D |
Weight |
Appx. 2.0 lbs without power cord |
* 230 VAC Input Power is optional ** 120VAC Relay Jumper MUST be removed *** 30 Amp configured model is available |
Product Manufacturer: IMC Instruments, Inc.
_______________________________________________________
HELP » Contact Customer Support
• Toll-Free help line offering product info and ordering support
• Online e-mail technical and installation support
_______________________________________________________
A complete typical solar domestic water heating system components and layout is shown below.

_____________________________________________________
Processing and Delivery Information: Please allow Processing Time as stated above for your order, plus standard transportation delivery time. Orders placed after 2PM EST may not begin processing until the next business day. Please call for Rush Processing and/or Rush Shipping options.