Delivery Information: Please allow 3-15 business days for delivery.

SEISCO Tankless
Electric Water Heater
Model CA-14

The tankless water heater that others can only claim to be!

After 14 years of research and testing, the SEISCO, whose technology has earned its developer 5 separate U.S. and many additional foreign patents, is recognized as the STANDARD for all tankless water heaters.

The SEISCO tankless water heater has earned International recognition for providing the highest level of temperature control performance, reliability and safety in its operation over any tankless water heater anywhere in the world today.

Product Application:
Two-chamber model designed for commercial point-of-use applications.

The CA-14 is ideal for supplementing existing tank-type heaters that are unable to satisfy user requirements in office buildings, beach houses, hair salons, horse stables, hunting and fishing cabins. Great for small offices and lavatories where incoming water temperature rarely drops below 75 degrees F.

This on-demand tankless water heater is the enabling technology for use as back-up to active renewable energy systems such as solar and geothermal water heating systems. The temperature activated control works effectively in re-circulating systems and in combination with tank-type heaters. 

High Efficiency Compact  Design -Commercial models provide unlimited hot water while operating within their designed gallons per minute range, immediately heating water when a hot water outlet is opened. Seisco models install inside closets, or on almost any wall. Water is only heated on demand, virtually eliminating standby heat loss and providing over 99% efficiency.

Microprocessor Control-On-board computer logic controls temperature through a modified proportional, integral, derivative [PID] control scheme. The control also provides self-diagnostics, signal the need for maintenance in case of a water leak inside the heater, incorporates an optional switch for local on/off power interuption, and intelligently controls power distribution to the heating elements while continuously monitoring critical functions in order to shut down the water heater if a failure occurs.

PowerShare™ Technology-Patented power distribution control technology utilizes computer algorithms and electronic triacs with patented cooling technology to pulse power on and off to all heating elements resulting in uniform temperature modulation between 1-100% of the element’s range. PowerShare along with constantly flowing water across heating elements ensure that heating elements operate at the lowest possible temperature. When the elements are turned off, low sheath temperature prevents boiling minerals out of the water causing buildup on the heating elements, prolonging element life. PowerShare also eliminates electrical disturbances in the home from the water heater, such as flickering lights.

Thermistor Temperature Sensing-Five thermistors continuously monitor inlet/outlet water temperature and the water temperature in each heating element chamber. Outlet water temperature is factory set to 120°F and is field adjustable between 90-145°F. In addition, water flow is sensed using the same thermistors, eliminating the need for troublesome flow switches.

Heating Elements-Industry standard 1 ½” hex head, direct immersion, heating elements utilize PowerShare technology to help eliminate scale build-up and prolong element life far beyond that of tank type water heaters. If an element fails, a replacement can be purchased from virtually any plumbing distributor.

Redundant Safety Features-Two water level sensors are located at the top of the water heater’s chambers to prevent powering on the heating elements if sufficient water is not detected inside the water heater. In addition, two safety cutoff switches, one manual and one automatic reset, shut down power to the heating elements should an unsafe condition occur.

Built-in Leak Detector and Alarm-A switch located inside the water heater’s cover along the bottom of the mounting plate activates an alarm when contacted by water.

Service Button/LED Light/Speaker-While on the phone with a Microtherm technician, the service agent pushes a service button in order to activate an audible diagnostic sequence. The service agent can also diagnose a problem through observing an LED that indicates service issues through a series of flashes.

Rust and Corrosion Resistant Engineering Composite Material- All water passages are constructed of a high temperature resistant DuPont® resin. Grades of the same resin family, but with lower properties, are so strong that they are used as the “header” for automobile radiators. Ability to resist extreme temperature changes far above those found inside Seisco models and superior chemical resistance make DuPont’s engineering composite material the ideal material for Seisco’s commercial tankless electric water heaters.

Continuous Venting Design-As water is heated, dissolved gases are released. Tiny bypass air passages at the top of each water chamber allow air and dissolved gases to exit unnoticed through the hot water outlet as hot water is being used.

Optional Demand Side Management Connection- Allows connection of an on/off control to the water heater [specify this option when ordering].

Cleanout Plates-Should sediment such as sand or silt from the water supply accumulate inside the water chambers, removable plates sealed with reusable gaskets allow access for cleaning without disconnecting wires or removing the heating module and control board.

¾” Non-Ferrous Inlet/Outlet Connections-Factory installed ¾” MNPT thermoplastic nipples allow easy plumbing connections and eliminate the need for dielectric fittings

Heavy Gauge Steel Mounting Panel-Modular water passages, the control board, and other components are assembled and then mounted to a heavy gauge steel back panel that includes four tabs with rubber feet for mounting the unit to the wall. A decorative plastic cover encloses all components.

¾” Electrical Conduit Connection-Standard ¾” electrical conduit connections allow fast wiring of the water heater.

Code Approvals-UL/CUL 499/64, HUD Mobile Home, ISRAEL, NOM, and NEC. Hydrostatically tested to 300 psi.

Technical Specifications
Model	CA-5	CA-7	CA-9	CA-11	CA-14	CA-18	CA-22	CA-28
KW Input	5	7	9	11	14	18	22	28
BTU Input	17,065	23,891	30,717	37,543	47,782	61,434	75,086	95,564
A	10 1/4	10 1/4	10 1/4	10 1/4	10 1/4	15 3/4	15 3/4	15 3/4
B	15 3/4	15 3/4	15 3/4	15 3/4	15 3/4	15 3/4	15 3/4	15 3/4
C*	6 1/4	6 1/4	6 1/4	6 1/4	6 1/4	6 1/4	6 1/4	6 1/4
D	10 7/8	10 7/8	10 7/8	10 7/8	10 7/8	16 1/8	16 1/8	16 1/8
E	7	7	7	7	7	12 1/2	12 1/2	12 1/2
Weight [lbs]	15	15	15	15	15	23	23	23
240 V. Amp.	20.8	29.2	37.5	45.8	58.3	75.0	91.7	116.7
# Elements	2	2	2	2	2	4	4	4
Element KW	2.5	3.5	4.5	5.5	7	4.5	5.5	7
# Breakers [240V]	1	1	1	1	2**	2	2	4***
Breaker [amps]	25	30	40	50	30	40	50	30

MORE » Additional Product Information

Product Manufacturer: Seisco

Return Policy
All SEISCO Tankless Water Heaters are tested at the factory just prior to shipment. It is the customer's responsibility to determine if sufficient electrical capacity exists to install the water heater prior to placing the order. [See Tankless Water Heater Installation Guide]

If for any reason the manufacturer authorizes a return of the unit, a 20% restocking fee will be applied to returns. Shipping costs will not be refunded.

_________________________________________________________

HELP » Contact Customer Support
• Toll-Free help line offering product info and ordering support
• Online e-mail technical and installation support